The software was named after the Bulgarian city of Plovdiv, which was the designated European Capital of Culture in 2019, together with Matera in Italy. The software version exocad released earlier in 2019 was therefore named Matera. (Image: exocad)
DARMSTADT, Germany: Software specialist exocad has announced that the new DentalCAD 2.4 Plovdiv software version is now available worldwide. The software features an enhanced FullDenture module, which helps facilitate the design of removable single-arch dentures in a guided digital workflow. It also allows mapping of a wide range of digital complete denture production methods, from printing to milling and ready-made or individually designed teeth.
With this software release, exocad provides dental technicians with a tool that will allow them to gradually prepare their laboratories for the digital fabrication of complete dentures. All exocad users with an upgrade contract can download the release immediately. The FullDenture module is available as an add-on module to DentalCAD and as a stand-alone version.
“Plovdiv is the second major release of DentalCAD in the last year. This release contains 64 new features and 45 extended functions that make our software even more attractive for every dental technician. This time, the focus of our innovation is on removable dentures and advanced implant-supported bridges,” said exocad CEO Tillmann Steinbrecher.
According to the company, new users especially will benefit from the tried-and-tested exocad wizard feature that guides the user step by step through the FullDenture module. The expert mode, however, will give experienced users maximum flexibility with regard to design. Additionally, the prosthetic tooth library has been expanded and now includes well-known manufacturers such as VITA, Dentsply Sirona and Ruthinium. With selected libraries, it is even possible to scale and modify existing shapes, allowing users to manufacture their own denture teeth in a variety of production methods. Additionally, significantly extended libraries for attachments are now available.
The improved thimble crown workflow for virtual gingiva-supported frameworks significantly reduces design time while increasing overall quality and consistency. (Image: exocad)
With DentalCAD 2.4 Plovdiv, dental technicians are now offered an optimised workflow for creating implant-borne thimble bridges without rescanning the substructure. In addition, new parameters are now available in the Model Creator, which allow dynamic adjustment of the offset around the model analogues. DentalCAD can also be seamlessly combined with PartialCAD to enable virtual gingiva-borne bridges on top of a partial framework design, thus supporting the highly automated production of removable prostheses. Further, the PartialCAD module has been significantly improved for the Plovdiv release and now features extended control and new options to meet individual preferences, along with usability improvements and additional tools for customised shapes of posts. Furthermore, users can now benefit from advanced dedicated workflows to design offset structures on scanned bars, jaw motion and a virtual articulator, as well as a module-extended selection of exocad-approved prosthetic component libraries, including over 52,000 components.
More information about the new software is available on the exocad website.
DARMSTADT, Germany: Software company exocad announced that DentalCAD 3.0 Galway, with new additional improvements to reduce design time, is currently ...
DARMSTADT, Germany: Exocad, an Align Technology company and a leading dental CAD/CAM software provider, recently announced the release of PartialCAD 3.1 ...
DARMSTADT, Germany: Exocad, an Align Technology company and a leading dental CAD/CAM software provider, has recently introduced its online shop, which ...
COLOGNE, Germany: Exocad, an Align Technology company and a leading dental CAD/CAM software provider, has multiple new products and service offerings, two ...
DARMSTADT, Germany: Exocad, an Align Technology company, recently announced the release of DentalCAD 3.1 Rijeka, the next generation of its CAD software for...
COLOGNE, Germany: Exocad, an Align Technology company and a leading dental CAD/CAM software provider, recently announced its participation in the 2023 ...
SCHAAN, Liechtenstein: Ivoclar revolutionised the fabrication of complete dentures two years ago with the introduction of the Ivotion Denture System, which ...
WOBURN, MASS., U.S./DARMSTADT, Germany: Exocad, an Align Technology company, recently announced the availability of ChairsideCAD 3.0 Galway in the U.S. and ...
In this interview, Novica Savic, chief commercial officer at exocad, explains why the company’s commitment to IDS remains unchanged and what visitors can ...
Education
Live webinar Tue. 16 April 2024 3:00 pm EST (New York)
CHICAGO, US: Exocad, an Align Technology company and a leading dental CAD/CAM software provider, has announced its participation in two upcoming US dental ...
DARMSTADT, Germany/NEW YORK, US: Exocad, a leading dental CAD/CAM software provider, has announced its participation at the 99th annual Greater New York ...
Brazil / Brasil
Canada / Canada
Latin America / Latinoamérica
USA / USA
Austria / Österreich
Bosnia and Herzegovina / Босна и Херцеговина
Bulgaria / България
Croatia / Hrvatska
Czech Republic & Slovakia / Česká republika & Slovensko
Finland / Suomi
France / France
Germany / Deutschland
Greece / ΕΛΛΑΔΑ
Italy / Italia
Netherlands / Nederland
Nordic / Nordic
Poland / Polska
Portugal / Portugal
Romania & Moldova / România & Moldova
Slovenia / Slovenija
Serbia & Montenegro / Србија и Црна Гора
Spain / España
Switzerland / Schweiz
Turkey / Türkiye
UK & Ireland / UK & Ireland
China / 中国
India / भारत गणराज्य
Japan / 日本
Pakistan / Pākistān
Vietnam / Việt Nam
ASEAN / ASEAN
Israel / מְדִינַת יִשְׂרָאֵל
Algeria, Morocco & Tunisia / الجزائر والمغرب وتونس
Middle East / Middle East
Dr. Irfan AbasLive webinar
Dr. Cem YıldızLive webinar
Prof. Dr. Erdem Kilic, Prof. Dr. Kerem KilicLive webinar
Mr. Peter Yu:sharpen(level=0):output(format=png)/up/dt/2013/01/Amann-Girrbach_Logo_SZ_RGB_neg.png "Amann Girrbach")
:sharpen(level=0):output(format=webp)/up/dt/2024/04/Study-points-to-lack-of-formal-education-on-cannabis-in-dentistry.jpg "Study points to lack of formal education on cannabis in dentistry")
:sharpen(level=0):output(format=webp)/up/dt/2024/04/Henry-Schein-appoints-three-new-executive-board-members.jpg "Henry Schein appoints three new executive management committee members")
:sharpen(level=0):output(format=webp)/up/dt/2024/04/Immediate-full-arch-zirconia-implant-therapy-utilising-the-power-of-robotic-assistance-and-digital-scanning_Fig-1-preophoto_title.jpg "Immediate full-arch zirconia implant therapy utilising the power of robotic assistance and digital scanning")
:sharpen(level=0):output(format=webp)/up/dt/2024/04/How-far-has-3D-printing-brought-clear-aligners.jpg "How far has 3D printing brought clear aligners?")
:sharpen(level=0):output(format=webp)/up/dt/2024/04/Dentists-fear-DIY-tooth-extractions-as-Wales-hikes-NHS-fees.jpg "Dentists fear DIY tooth extractions as Wales hikes NHS fees")
:sharpen(level=0):output(format=webp)/up/dt/2013/01/Amann-Girrbach_Logo_SZ_RGB_neg.png "Amann Girrbach"){kind=logo}
:sharpen(level=0):output(format=webp)/up/dt/2024/01/ClearCorrect_Logo_Grey_01-2024.png "ClearCorrect"){kind=logo}
:sharpen(level=0):output(format=webp)/up/dt/2015/09/Curaden.png "Curaden")
:sharpen(level=0):output(format=webp)/up/dt/2022/01/Ivoclar_Logo_19-01-2022.png "Ivoclar"){kind=logo}
:sharpen(level=0):output(format=webp)/up/dt/2023/11/Patent%E2%84%A2-Implants-_-Zircon-Medical.png "Patent")
:sharpen(level=0):output(format=webp)/up/dt/2022/01/Sprintray_Logo_2506x700.png "SprintRay"){kind=logo}
:sharpen(level=0):output(format=webp)/up/dt/2019/04/logo.png){kind=logo}
:sharpen(level=0):output(format=webp)/up/dt/2020/01/Out-now-exocad-releases-DentalCAD-2.4-Plovdiv.jpg "Out now: exocad releases DentalCAD 2.4 Plovdiv")
:sharpen(level=0):output(format=webp)/up/dt/2017/06/Dental-Tribune-Icon.jpg "Dental Tribune International"){kind=icon}
:sharpen(level=0):output(format=webp)/up/dt/2021/04/Feature-image-DentalCAD_780-x-439.jpg "DentalCAD 3.0 Galway: Exocad announces roll-out")
:sharpen(level=0):output(format=webp)/up/dt/2023/09/Exocad-releases-PartialCAD-3.1-Rijeka-with-22-new-functionalities.jpg "Exocad releases PartialCAD 3.1 Rijeka with 22 new functionalities")
:sharpen(level=0):output(format=webp)/up/dt/2022/03/Exocad-introduces-exocad-shop-for-DentalCAD-software-users-2.jpg "Exocad introduces exocad shop for DentalCAD software users")
:sharpen(level=0):output(format=webp)/up/dt/2023/03/exocad-at-IDS-2023_1.jpg "Exocad presents new software releases at IDS 2023")
:sharpen(level=0):output(format=webp)/up/dt/2022/08/exocad_DentalCAD_3_1_Rijeka_Press-Release_1920x1080_Smile_Creator.jpg "Exocad introduces DentalCAD 3.1 Rijeka software")
:sharpen(level=0):output(format=webp)/up/dt/2021/07/exocad-PartialCAD-Galway_780-x-439.jpg "Exocad releases PartialCAD 3.0 GALWAY with advanced design features")
:sharpen(level=0):output(format=webp)/up/dt/2023/03/Exocad-to-showcase-3.1-Rijeka-releases-at-IDS-2023.jpg "Exocad to showcase 3.1 Rijeka releases at IDS 2023")
:sharpen(level=0):output(format=webp)/up/dt/2022/10/Ivoclar-and-exocad-extend-options-for-digital-dentures-with-integration-in-DentalCAD_1.jpg "Ivoclar and exocad extend options for digital dentures with integration in DentalCAD")
:sharpen(level=0):output(format=webp)/up/dt/2021/11/Exocad-releases-ChairsideCAD-3.0-Galway-software-for-single-visit-dentistry-in-North-America.jpg "Exocad releases ChairsideCAD 3.0 Galway software for single-visit dentistry in North America")
:sharpen(level=0):output(format=webp)/up/dt/2021/08/Our-booth-will-be-the-meeting-point-for-the-exocad-community_IDS_Novica-Savic_CCO-exocad.jpg "Interview: “Our booth will be the meeting point for the exocad community”")
:sharpen(level=0):output(format=webp)/up/dt/2024/02/Exocad-to-introduce-top-features-of-new-DentalCAD-3.2-Elefsina-release-in-Chicago.jpg "Exocad to introduce top features of new DentalCAD 3.2 Elefsina release in Chicago")
:sharpen(level=0):output(format=webp)/up/dt/2023/12/Exocad-DentalCAD-3.2-Elefsina-update-includes-more-than-60-new-features2.jpg "Exocad DentalCAD 3.2 Elefsina update includes more than 60 new features")
:sharpen(level=0):output(format=webp)/up/dt/2023/11/Exocad-to-participate-in-Greater-New-York-Dental-Meeting-2023.jpg "Exocad to participate in Greater New York Dental Meeting this month")
:sharpen(level=0):output(format=webp)/wp-content/themes/dt/images/3dprinting-banner.jpg "3D Printing Banner")
:sharpen(level=0):output(format=webp)/wp-content/themes/dt/images/aligners-banner.jpg "3D Printing Banner")
:sharpen(level=0):output(format=webp)/wp-content/themes/dt/images/covid-banner.jpg "3D Printing Banner")
:sharpen(level=0):output(format=webp)/wp-content/themes/dt/images/roots-banner-2024.jpg "3D Printing Banner")
To post a reply please login or register